Tascam CA-XLR2d-C XLR Microphone Adapter for Cameras, Canon

CA-XLR2d is a XLR microphone adapter for mirror less cameras developed in collaboration with Canon, FUJIFILM, and Nikon. Planned and developed in collaboration with Nikon, this analog interface camera kit provides a high-quality sound recording environment to wide-range of camera users. Choose the appropriate microphone or input that matches your application. From a single shotgun mic for interviews or dialog, to dual dynamic or condenser mics for stereo imaging, or the entire audio mix fed from the master mixer using the line level capability, CA-XLR2d supports a wide variety of shooting applications. CA-XLR2d is equipped with a high-performance microphone preamplifier that can process anything from room tone to explosions and support a wide range of sets and environments. Each input supports microphone / line level switching and + 48V phantom power supply. CA-XLR2d allows input of dynamic microphones, condenser microphones and line-level audio signals from a mixer.

CA-XLR2d-C
CA-XLR2d unit (with bottom connector cover) x 1
CA-AK1-C accessory shoe mount adapter (with connector cover/attached to unit) x 1
CA-AK1-AN cold shoe mount adapter (with interface connector cover) x 1
Battery holder (with connector cover) x 1
Note) Separately, two AA batteries are required
Mic holder (attached to unit) x 1
Quick Guide (including warranty) x 1
3.5mm(1/8") stereo mini cable x 1
TASCAM ID registration guide x 1

Key Features

• Microphone adapter with XLR input expansion for mirrorless cameras
• Equipped with 2 XLR/TRS input terminals, you can use the optimum microphone according to the set and environment
• Equipped with a high-performance AD converter, it can directly transmit digital audio without deterioration to the camera via an accessory shoe.
• Power can be supplied from the camera body via the corresponding accessory shoe
• Equipped with a high-performance HDDA mic preamplifier for high sound quality, low noise, and wide dynamic range
  (Microphone / line level switching, + 48V phantom power supply compatible)
• Equipped with 1/8-inch stereo mini jack (INPUT 3) for a lavalier microphone or microphone requiring plug-in power
• Compatible with virtually all cameras that have an analog input by using the included battery box, cold shoe mount adapter, detachable microphone holder with shock mount mechanism, and analog audio cable
• Replaceable shoe connection adapter

Technical Specifications

Sampling Frequency
48k / 96k Hz
Quantization Bit Rate
16 / 24 bit
* Fs & Bitrate are synchronized with the settings of the connected camera
Number of channels
2 channels
INPUT 1/2 Jacks
Connectors
XLR-3-31 equivalent (1: GND, 2: HOT, 3: COLD)
6.3mm (1/4”) standard TRS jacks Input (Tip: HOT, Ring: COLD, Sleeve: ND)
* Phantom power supported by XLR only
MIC IN
Input switch set to “MIC”
Input Impedance
2k or higher
Maximum Input Level
+6dBu (ATT setting “46dB”) *1
Minimum input level
-60dBu (ATT setting “0dB”) *1
Gain range
66dB
LINE IN
Input switch set to “LINE”
Input Impedance
10k or higher
Maximum Input Level
+24dBu *1
Rated input level
+4dBu *1
Gain range
66dB
MIC inputs (Unbalanced)
INPUT 3 Jack
Connector
3.5mm (1/8”) Stereo mini jack
* Support plug-in power
Input Impedance
2k or higher
Maximum Input Level
+6dBV (ATT setting “46dB”) *2
Minimum input level
-60dBV (ATT setting “0dB”) *2
Gain range
66dB
Plug-in power
2.7V
PHONE / CAMERA output (Unbalanced)
OUTPUT Jack
Connector
3.5mm (1/8”) Stereo mini jack
Output level
0.29Vrms (Fixed, OUTPUT setting “CAMERA”)
Headphone working impedance
16 to 250
Power
2 AA batteries (alkaline, NiMH or lithium-ion)
Supplied through accessory shoe of compatible camera
Power consumption
2.0W (maximum)
Dimensions
88.2(W) x 119.1(H) x 110.0(D) mm (not including protrusions)
Weight
CA-XLR2d-C
341g (mic holder attached, battery holder not attached)
CA-XLR2d-F
331g (mic holder attached, battery holder not attached)
CA-XLR2d-AN
357g (not including batteries, mic holder attached, battery holder attached)
Operating temperature
0 to 40C (32 to 104F)
Included
CA-XLR2d-C
Mic holder (attached to unit, Battery holder, 3.5mm (1/8”) stereo mini cable, TASCAM ID registration guide, Quick Guide (including warranty), CA-AK1-C accessory shoe mount adapter (attached to unit), and CA-AK1-AN cold shoe mount adapter
CA-XLR2d-F
Mic holder (attached to unit, Battery holder, 3.5mm (1/8”) stereo mini cable, TASCAM ID registration guide, Quick Guide (including warranty), CA-AK1-F accessory shoe mount adapter (attached to unit), and CA-AK1-AN cold shoe mount adapter
CA-XLR2d-AN
Mic holder (attached to unit, Battery holder, 3.5mm (1/8”) stereo mini cable, TASCAM ID registration guide, Quick Guide (including warranty), CA-AK1-AN cold shoe mount adapter(attached to unit)