Tripp Lite APSX2012SW 2000W 12V International Inverter/Charger Pure Sine Wave 230V 8A/80A Hardwire

The Tripp Lite APSX2012SW 2000W APS X Series 12V DC 230V AC Inverter/Charger is a reliable power source for a wide variety of power tools, computers, audio/video components and other sensitive electronics at mobile, emergency and remote sIt's. With no fumes, fuel or excess noise, It's an excellent alternative to generator power.

Key Features

• Reliable Power for Mobile, Emergency and Remote SIt's
• Generates 230V pure sine-wave power from 12V battery bank
• Ideal for powering variable-speed tools, computers, LEDs, fans, audio/video components and other sensitive electronics
• Designed for easy installation in RVs, commercial and fleet vehicles, emergency vehicles and construction equipment
• Functions as vehicle inverter, standalone AC power source or extended-run UPS
• Unlimited runtime with variety of user-supplied batteries
• Pure Sine-Wave Power for Normal and Peak Power Demands
• 2000W of continuous power
• 4000W of peak power to accommodate surge power demands during equipment startup and cycling
• Automatic overload detector, built-in cooling fan and resettable AC circuit breakers protect unit from damage
• High-current DC input terminals for simple hardwired installation

Technical Specifications

Output
Nominal Output Voltage(s) Supported
230V
Frequency Compatibility
50 / 60 Hz
Output Receptacles
Hardwire
Pure Sine Wave Output
Yes
Output (Watts)
2000
Continuous Output Capacity (Watts)
2000
Peak Output Capacity (Watts)
4000
Output Voltage Regulation
LINE POWER (AC): Maintains 230V nominal sine wave output from line power source. INVERTER POWER (AC): Maintains sine wave output voltage of 230 VAC (+/-5%).
Output Frequency Regulation
50 Hz (+/- 0.3 Hz)
Overload Protection
Includes 15A input breaker dedicated to the charging system and 15A output breaker for AC output loads
Input
Nominal Input Voltage(s) Supported
230V AC
Recommended Electrical Service
DC INPUT: Requires 12VDC input source capable of delivering 240A for the required duration (when used at full continuous capacity - DC requirements increase during OverPower and DoubleBoost operation). For automotive applications, professional hardwire installation with 400A minimum battery system fusing is recommended.
Maximum Input Amps / Watts
DC INPUT: Full continuous load - 240A at 12VDC. AC INPUT: 17 amps at 230VAC with full inverter and charger load (8.7A max charger-only / combined input load to support charger and AC output is automatically controllable to 66%-33%-0% based on AC output loading using the charger limiting set points - see manual for setting instructions)
Input Connection Type
DC INPUT: Set of 2 DC bolt-down terminals. AC INPUT: Hardwire via built in junction box with cover plate
Voltage Compatibility (VAC)
230
Voltage Compatibility (VDC)
12
Battery
Expandable Battery Runtime
Runtime is expandable with any number of user supplied wet or gel type batteries
DC System Voltage (VDC)
12
Battery Pack Accessory (Optional)
98-121 sealed lead acid battery (optional), BP260
Battery Charge
Selectable 6-60 amp
Expandable Runtime
Yes
Voltage Regulation
Brownout Correction
Brownout transfer point - 170V (+/- 3%)
Severe Brownout Correction
Brownout reset point - 180V (+/- 3%)
Physical
Shipping Dimensions (hwd / in.)
26.10 x 11.60 x 12.10
Shipping Weight (lbs.)
55.90
Unit Dimensions (hwd / in.)
7.25 x 8.75 x 21.75
Unit Weight (lbs.)
51.16
Cooling Method
Multi-speed fan
Material of Construction
Powder coated steel
Receptacle Color
Gray
Form Factors Supported
Mounting slots enable permanent placement of inverter on any horizontal surface (see manual for additional mounting information)
Environmental
Relative Humidity:0-95% non-condensing
Line / Battery Transfer
Transfer Time (Line Power to Battery Mode)
10 milliseconds
Low Voltage Transfer to Battery Power
In AC "auto" mode, inverter/charger switches to battery mode as line voltage drops to 144V (user adjustable to 163, 182, 201V - see manual)
High Voltage Transfer to Battery Power
In AC "auto" mode, inverter/charger switches to battery mode as line voltage increases to 259V (user adjustable to 264 - see manual)
Special
Load Sensing
150W ~ 220W
Certifications
Tested to EN62040-1 (CE), EN62040-2 (EMC), RoHS
Item Includes
APSX2012SW 2000W APS 12V DC 230V AC Inverter/Charger
Owner's manual