Tripp Lite PV3000GFCI 3000W PowerVerter Plus Heavy-Duty Inverter with 4 GFCI Outlets

Utilize your vehicle's battery to efficiently power office equipment on the road or power tools at a work site with Tripp Lite's PV3000GFCI. Continuously supplies up to 3000 watts of 120V AC power to 4 AC GFCI protected outlets from any 12V battery or automotive DC source. Includes a PV remote and 25 feet of cable. Heavy-duty, compact metal case design is among the smallest, most rugged inverters available at this power level. Conforms to OSHA 1926.404

Key Features

• Converts DC power into 3000 watts of continuous 120V AC power
• 15- and 20-amp outlets provide 120V AC power
• Includes "Battery Saver" low voltage alarm/shutdown
• Heavy-duty DC input terminals assure solid connection to battery. Dual connections provide high wattage to support heavy equipment loads.
• Operating mode switch controls inverter operation.
• Remote control jack provides optional remote monitoring and control (when used with FREE, included LED/switch module)
• Remote Control LED/Switch Module controls and monitors your inverter from virtually anywhere within your vehicle with use of included extra-long cable. Allows multiple mounting options, including behind or below a dashboard or compartment. Features daisy-chain capability
• Battery charge level LEDs indicate the approximate charge level (high/medium/low) of connected batteries
• Connected load level LEDs indicate the approximate wattage load level (high/medium/low) of connected equipment
• Sturdy extruded aluminum case stands up to the toughest work environments
• Battery conservation charge dial conserves battery power by setting the low-load level at which the inverter automatically shuts off
• 1-year limited warranty

Technical Specifications

Output
Nominal Output Voltage(s) Supported
120V
Frequency Compatibility
60 Hz
Output Receptacles
(4) 5-15R
Pure Sine Wave Output
No
Output (Watts)
3000
Continuous Output Capacity (Watts)
3000
Peak Output Capacity (Watts)
6000
Output Voltage Regulation
Maintains PWM sine wave output voltage of 115 VAC (+/- 8 VAC)
Output Frequency Regulation
60 Hz (+/- 3 Hz)
Overload Protection
Automatic overload protection shuts down inverter system in the event of overloads. Output is protected by 2 built-in 20A circuit breakers (each controlling power to 2 outlets). Inverter and electrical system are further protected via set of 6 40A automotive input fuses.
Input
Recommended Electrical Service
Requires 12VDC input source capable of delivering 286A for the required duration (when used at full capacity). For automotive applications, professional hardwire installation with 500A battery system fusing is recommended.
Maximum Input Amps
286
Maximum Input Amps Details
Full continuous load - 286A at 12VDC, No load - 2.6A at 12VDC, Shutdown / load sense mode - less than 500 milliamps
Input Cord Length Details
User supplies cabling. Minimum gauges for full load operation: 0 (10 ft max), 00 or 2/0 (13 ft max), Twin 00 using 4 conductors (26 ft)
Voltage Compatibility (VDC)
12
Physical
Shipping Dimensions (hwd / in.)
11.10 x 4.20 x 16.00
Shipping Weight (lbs.)
16.50
Unit Weight (lbs.)
12.2
Cooling Method
fan
Material of Construction
Aluminum / sheet metal
Form Factors Supported
Mounting slots enable permanent placement of inverter on any horizontal surface (see manual for additional mounting information)
Relative Humidity
0-95% non-condensing
Operating Temperature
32-104 Fahrenheit / 0-40 Celcius